Tuesday, March 17, 2015

bluetooth headset hack

Hi,

Check this one out - 
this was a bluetooth device for sports headphones.
I took out the headphones part, and soldered a head phone jack into it instead.
This allows me to use it on an external speaker [shown below], or I can connect it to a pair of regular ear buds. I can also change the song with the buttons on the device.
Pretty cool. I like the way it works, its wireless, and I can play music off it.
I made it for my car, that doesnt have a usb. I plug this into the tape caseette adapter [sad right] and then play my music over bluetooth over the adapter.

Let me know what you think.
-B






Raspberry Pi model B+ DVR / NoIR

Hello again,

Here is my raspi model b+ NOIR _ DVR
It took me a bit to source the parts, but here is what im using, if you wanted to replicate this config :

waveshare RPI display 3.2 tft [$18/ebay]
raspberry pi mobel b+ [$35]
generic tranparent case [$3]
NoIR camera module [$25]
camera module case [$10]

extras: usb flash disk, edimax wifi-n


After getting everything connected, and working once, using the raspbian image,
I then put the tft screen on the device, and began the config.
In this pic i am using a sandisk usb stick. It was replaced with a mini usb flash [barely visible on the left side, same size as mini-n wifi adapter]
I then drilled into the top of the case, for the camera mount. It has 2 screw holes for mounting on either side. I have 1 screw in tight, the other lose, and easily removed. that way, i can still swing it 90 degrees, so I can use the hdmi adapter, if needed. [ssh into it is easier]
This design took a bit to come up with to work as expected.
I have the recording being display on the tft screen as is it happening . 

That was my intent with this device, similar to a real camcorder.
I was also thinking about jamming a small spinning disk into the case, but that could be a later mod.
at this point, I would like to see how it performs in the field.

But, i see this as a long term solution, and easily accessible for anyone . 

When the dvr is powered on, it starts to autorecord [takes 10mins to start] from boot [based on a script] , and then records, and outputs to the usb flash - which could be removed after converting the .h264 files to mp4.

So far, overall, i am very happy with the end result. I will probably tweak it more, going forward, but its a great little setup for what i need it to do.

Let me know what you all think.
thanks,
Brian

early in the process .. 

early concept .. and design, but didnt have the screen at that point yet [top PI]

here is a working model, when i first got the screen and the pi :)

Image is displayed on the rear screen . The flash makes it look bad, but it works great

front view of the device

Monday, October 27, 2014

New GHOST BLOG

Hi,

check out the *new ghost blog* :

http://briand354-ghostblog.blogspot.com/



**This blog will remain, but all ghost related pics, video, etc will start to migrate to the new blog.

Thanks,
Brian

Wednesday, June 11, 2014

Car dealers are the scum of the earth. Follow this guide next time you buy.

Hi-

Car dealers are fucking scum. (99% / 1% are honest)
They are ALL out to fuck you.

There is not another way to say it.

The truth hurts, and I learned this lesson many times over.


Here are a few tips to follow to not get fucked (like me) -

If you are not mechanically inclined .. its ok. just look for basic clues as to the vehicle s condition ..


like rust, like did it start right away, does it look like its been sitting,
is there rust on the rotors (shiny disc in the wheel).
look at the spot where the car was parked .. is there a patch of oil stains, even a drip ? or any discolorations ?

 Act flightly. I know that sounds crazy, and dont give up your keys unless they want them to evaluate your trade. Once they are done, GET YOUR KEYS BACK HOWEVER YOU HAVE TO. (more below #3)

 1] Dont sign anything, other than a permit to run your credit. It isnt that big of a deal, and your not IN any trouble yet. But its getting close.

2 ] Assume the dealer is a heroin junkie. Do NOT under ANY curcumstances give them more money than you are willing to lose.
let me be clear on this - give them $100 . no more, no less.
There is not a minimum down payment % amount for the vehicle you want. its a dealer trick to keep your money.
If you get into an argument/disagreement later (YOU WILL!) , then you can walk away, and make them chase you! instead of the other way around.

*i would like to reiterate this point. only $100. if they arent willing to accept that as a down payment - WALK AWAY. i dont care if you like that car. there will be another, somewhere else. its not that rare, and can be bought elsewhere.
chances are your paying to much for it ANYWAY.

3 ] Your trade in -  So this is the awful part of the game for you.
You paid X for the car.  The dealer is going to offer you 1/3 of that.. or between 2 grand and 4 grand. nevermind if you have a payoff.  Look at the bluebook in good condition for your model/year.  Bluebook takes an avg of all purchases, sold @ auction/private and uses that to crush the numbers to give a semi acurate number of what you should expect back.
heres what i learned from my experience -
your getting the lower of all the values, and thats if your lucky.
So - heres what you are going to do instead of accept their offer -

-Go back to rule #1 dont sign. i dont want to hear about how nice the new car. dont care.

Then, see what they are willing to offer you, + what you have cash to put down on the car, what you will owe, and your rate. (depends on ur credit)

Now comes that part i learned this time around ... take what they are willing to offer you for the car .. and call another car dealer, in your area.
see if those numbers jive OR if he is offering you a better number on your car.
If the other dealer is offering a higher number sell it to him CASH, even if you were going to trade it in. their contracts will still allow you to do that, if you pay them cash INSTEAD of the car. a hidden little extra on the purchase contract.

again, sign nothing.
easiest way to do this, is call before you go to the dealer to ask about car XYZ  with the fancy lights. ;)

Just assume all the vehicles on the lot are shitboxes, until you test drive it, and prove its a worthy of ownership car. take it on the highway ,.. does it shake at highspeed ?does it smell funny ? if yes, walk away .. oil burning, sweet smell, exhaust .. indications of major problems.

does it shift hard, do all the gears work ? most important, do you even like it ?
DO YOU ? really ? your going to have to live with it for the next X years .. 'you better fucking LOVE it.

ok, so now, yes, you want it. it goes vroom, and you feel alive. yay. oh boy.

In my experience, all car dealers arent going to negotiate with you at all on the price. they all same the same thing .. the price is the price, its already the first best offer ... etc.etc..
If you cant afford car X @ price Y,, dont even bother looking at it. they wont budge. and you need a car.

so now that you are ready to do this, and you are ready to sign shit... again .. RULE #1 .. dont yet.

heres a trick i wish i knew .. learned this one the hard way.

they are going to sit you down after a LONG day of car bullshit.
you are tired. and bored, and want to leave. if you have followed my guide so far .. you havent signed anything yet, and have more than 1 offer on your trade in car.
bring s up #4 - the contract .

4 ] Have them prepare you the paperwork (DONT SIGN). For your the car your interested in + your trade (if you choose to do so), and what you will pay/how much you will owe @ what rate. 
Get a copy of it and walk out with it. IM SERIOUS.
dont sign anything. if you want the car, put the $100 down, and get the paperwork, and leave with it.  tell them you want to go eat or something .. and need a chance to review it. dont sign it there on the spot, it would be FUCKING STUPID to sign it right then .

if they want to sell you the car, they will let you leave with the paperwork.
if not, get back you deposit and WALK AWAY. you could always get the car from a private seller - cheaper in most cases, from a possibly honest person. at least you have a chance.



5] extra crap they want to sell you -
2  in particular -
Enviornmental protection/Scotch Guarding/ New car protection

and

Extended service contract (mechanical)


So- we will address this first -
Enviornmental protection/Scotch Guarding/ New car protection

They are going to give you horror stories on how the elements are going to ruin your paint, destroy your car , spills on the interior ... etc..

Its all bullshit. In my case , a good looking woman (finance mgr) will tell you its included as part of your purchase.
I get a itemized list of items for my car purchase (bill of sale) .. and see theres a
$1550 extra charge for "dealers installed options" - and a breakdown of that is -
1- Env protection/Scotchguard - $999.00
2- Remote starter - $550

Both of which were told to me, as were installed free due to my service contract i bought. it was a scam. it is PURE PROFIT and THEM FUCKING YOU.

I consider myself somewhat mildly inteligent, and this made me angry. I went back to the dealer 2 days in a row @ 9am. (i hate getting up, and barely slept due to this issue) Its not the money , its the prinicipal ,, and for me it was both.
money doesnt grow on trees, and we all work hard.

Dont let them take your hard earned money, in these scams.

**If you must get your car to have that level of protection -
go pay the $250 to have a professional company do it on the side, once you own the car OR do it yourself for $50 of supplies.
Also, a remote car stater is $150 installed at local car shops, unless you go to the dealer, and feel like paying 3 times as much for the same thing.


The next point is the service contract.
I would consider this up to your preference. I dont trust the dealer AT ALL, and think all the cars are POS' and would like to make sure I get a new engine/trans IF mine blows.
I think its worth it .. but not everyone else will. they will just want the cost of the car, and then call it a day,and take their chances ..


But, if you have an existing service contract on your old trade in car .. heres a few caviats i learned in this experience.,,,

It is transferable to a private party.
You CAN CANCEL IT, and get some of your money back.
*you will pay a penalty, but will get some $ back in your pocket. not a bad deal.


6 ] Final ACT
Call the dealer a day or two after ward, (you have had a chance to review that paperwork) see if that car is still available (IF you didnt put the $100 down) and get the financing done at the time of purchase, OR get a banks check to pay for it AT THE TIME OF PICK UP.
Make sure there are no hidden fees, etc and take your chances.
hopefully it will work out for you.

7 ] PICK UP TIME
if you are going to trade in your car, leave it on almost empty - gas-wise.
they are going to do that exact same thing to you, when they give you your new car. do that same thing right back to them. the first trip I take no matter what car ive bought was to the gas station. EVERY TIME.



So I hope this helps SOMEONE out there.
I hate feeling stupid, taken advantage of, slighted, burned, or niave.

just because your not an expert in car repair (nor am I), doesnt mean you shouldnt be able to leave feeling free of mind, with your money, and leaving the car in the brinks is fine.

Please never think that you cant leave and find that same car elsewhere in 95% of situations.

-Again, i hope this helps someone . I will refer to this the next time i buy anything major.  If you heed my warning, you may have better results than i .


Im sorry that some of this maybe seen as harsh, but i would rather speak what i consider the truth, rather than lie, and mis-represent the truth I have found.

My last tip- never fall in love with a car .. unless its a project car.
your daily driver, (if you need 2 cars like me) should be your work beater, the other you can fall in love with, but will cheat on you with anyone that throws money at it. Consider a corvette or something like that like a stripper.
she will take your money, and break YOU down until she discards you to get her new master ,, that she will do that exact some thing to. Its an evil thing.


*the truth is the most important thing I think you can offer someone, please share this to whomever you think would benefit from it.



Tuesday, June 10, 2014

FUCK the 2003 SUBARU WRX

Hi,

I bought a 2003 subaru WRX ..

8 months ago.

03 wrx in shitbox blue. fuck this POS


IT HAS BEEN THE WORST CAR I HAVE EVER OWNED.


Here is my note to subaru -  GO FUCK YOURSELF.

;)


 While it may have some curb appeal,it has been the worst car i have ever owned.



So let me start with some of the extensive repairs i poured into this shitboxm and then the reasons i hate it.

-Repairs -
-=Exhaust=- sure fine, i live in NE - so the weather here is rough on all exhausts.
It cost me $1400 to fix the turbo-integrated up-pipe (w/ converter).

-=CLUTCH=- $2000 - needed a clutch after a few months of bumper to bumper traffic. I replaced it with an after market clutch (act 6 puck) and it was awful and clunky and shook like a bastard after almost 1000 miles.

A/C pulleys, COOLANT related piping, and constant leaks.
It cost ~$350 give or so . . .  to fix the random and stupid issues that plague this nightmare of a car.
*
*
*
==============================================
in 8 months of ownership, i spent around an extra 5 grand maintaining this nightmare of a vehicle.

It had 123K on the vehicle when i bought it, I drive less than 20 miles a day, mostly bumper to bumper traffic, car never even hitting highway speed .
==============================================

I put a total of 10K miles on the car in the 8 months I had it.
Coolant constantly leaked out of its faulty made clamps, and needed to be tightened frequently, or you get to fill up the tank, and smell burning coolant on your ride into work every day ;)

==============================================

Now, for my review of what made me hate/loathe this vehicle.....


-faulty 5 speed transmission . worst 5 speed ive ever driven, first gear was 'locked out' by design so you couldnt shift into the gear at ANY speed.
let me be clear about this .. DEAD STOP, or its grinding, and will not go into first. So you might think it was me ? It fucking wasnt, and it was like that since the day i bought the vehicle. I test drove 2 other cars, and they were both the same ..
so, you get to shift into 2nd, and then shift into first EVERY time you want to shift up to first.  While the STI may not have shared this weak tranny, i wouldnt trust ANY subaru.  The power loss/turbo lag made this car slow, and annoying to drive .. esp. in traffic.


-Constant repairs, coolant leaks, poor craftsmanship/design.
-expensive parts .. my corvette had cheaper parts in some cases ,, and this was not even close to that level of performance/reliability ;)

-Handled like a broken golf cart .. nothing special about its AWD system even slightly. Wasnt fun to drive once i owned the wrx, and wasnt all that more powerful than the crappiest honda/toyota. *it wasnt a prius,, dont get me wrong, but was an awful daily driver.

==================================================

I YOU ARE CONSIDERING BUYING A SUBARU, GO FLUSH YOUR MONEY DOWN THE TOILET - THERES A CHANCE IT WILL CLOG, AND COME BACK UP TO YOU

==================================================



If if could compare it to my previous car - my baby .. the prelude ..
here are my specs from my previous car -
187,000 miles when i bought it off a junkie in CT.
Needed a clutch/flywheel, rims, tires, brakes, and everything leaked.
I purchased the car for $2600, and put $1000 give or take with the clutch / used rims/tires, and sealed the engine up best as possible.

I got a year of reliability out of the car before it TOTALLY DIED on me one night from work. the motor finally siezed after many a retard raced the motor before i got it.

-same commute BTW- lastest longer w/o issues, and almost 2 times the milage, in horrid condition.

it was reliable, had all the options (moonroof, leather, 5spd) -

This has been my 7th honda .. (4 preludes, 3 accords).
Honda in my opinion is the best car on earth ..
Ive had the following cars in my life so far -  (in order)

-88 dodge carvan v4 or 6, cant remember
-87 pontiac firebird v6 auto
-88 saab 900 4cyl 5 spd
-84 saab 900 4cyl 5spd
-87 ford ltd auto
-83 pontiac trans am 4 spd
-78 chevy camaro z28 auto
-89 honda accord ex auto
-93 honda accord ex 5spd
-95 honda accord lx 5spd
-87 honda prelude 5spd (1st lude)
-93 honda prelude vtec 5spd (miss that car)
-92 corvette auto
-99 honda prelude SH 5spd
-96 honda prelude vtec 5spd
-03 subaru WRX 5spd (shitbox)
-new car



I have had an extensive list of cars, types, makes , models, and have driven all the normal cars, and fixed quite a few on my friends cars over the years.

with the exception of the chevy cavaliers, and some hyundias ,nissans, I feel like there are not reliable cars made anymore.



So, my rant is coming to an end. just heed my warning .. dont buy a subaru wrx. go get something (anything) else.



Friday, May 23, 2014

MP3 Player Hack .. more POWAR!! my hackpod

Yo..

Wassup internets ..


I doubt i will be taking this out of the house .. but im doubting anyone would steal it ;)
Im sure they would be too purplexed as to what the hell it is ..

I got one of the slim mp3 player online (ebay) for like $20 / third gen mp3/4 player or something ..
It has the worst battery life of any device in recent memory.
So i fucking hacked it.

;)

Pretty bad when you have to hack an already questionable hack device .. like this ..

I first removed the unit chipboard from the outer layer of the chassy of the device.
It was painful ..  and the battery i removed from it was about the size of a nickel, stacked twice.

NO WONDER it had AWFUL battery life .
I took an old li-cad cell battery i had lying around .. and soldered  a + and - connection to it.
I then wired it to a breadboard, and then had the connections meet on the breadboard.


crazy ass side view

                I took  the trusty dremel to my hackpod  (not authentic iproduct) :) I cut the case , shaving off a few inches in the middle, where the new pcb is laid out.
Here is a pic of the rear of the device. Is it just me or does this look like a bomb ?
I glued the PCB to the rear of the device so no tiny lead wires could move any further --
A trick i learned from many a soldering/hacking project. at least you can pull on the leads w/o ripping them from the board .. and having to repair your accident .. always a better idea ..

But, it works like a charm, and it is able to last an incredibly long time now. before i was getting 20-30 mins maybe out of a full 5-6 charge. I doublesided taped the battery to the case .. in case it goes bad, i could always easily replace it.

I know its ugly . ..  but i would rather have something that looks like this, than buy a new one with the exact same problem , and this particular one plays AVI files and mp3s .. so i am very partial so it.


Maybe this will help som eone. .. hack something,.
stop throwing stuff like this away .. landfalls are filled with working stuff .. why not hack it and get another few years out of it and make it better ? (than a new one)


-B
-out-

Wednesday, October 16, 2013

Ghost ORB, and a turkey shot ..

Yo,


Here is a pic from the last ghost hunt I have been able to attend.
I heard something creak (like wood or something) next to me, and it freaked me out a bit. I kept snapping pic, and this out came out..

I tried for a while to re-create the photo, and debunk it, but could not.

 That is very large. I want to get some more hunts going, but havent had the time. This halloween, maybe I will find a 'haunted' site to go to ... we'll see.




Now for the other part of the post -
Turkey time -





Owww

-out

VMWARE server out of desktop

Yo,

I made a vmware ESXi 5.1 server out of a hp dc7900
My buddy gave me a bunch of memory for it, and I
added hard drive to it, and added them as datastores.
I also made a false bay out of an old cd rom  -- check it out.
Also, put a SSD in there :)   needed an ssd ...
It works pretty well, and boots very fast compared to my other vmware server.  







Fedora Tablet out of old tablet

Yo,

So check this out ..
I took an old HP tablet, and threw fedora 17 on it.
It jams, and has a touch pen to use as a mouse, and a keyboard that can be detached .. and usb ports, and sd card port, and pcmcia ..
Actually a pretty useful machine .. and built in wifi.
not a bad deal .. not the fastest thing on the planet as it only has a single core, but good for a work beater w/o having to lug another laptop.

check it out.



 -out
 

Saturday, August 10, 2013

Started Playing w/ Glowz spray paint ... having a good time

Who knew that you could have so much fun for $5 ?

I have always been fascinated by anything that glows in the dark ever since i was a little kid.

I started seeing these cases for cell phones that glow in the dark ..
Then got jealous ..

Every phone but the phone I have (evo3d) has a crappy case available that glows in the dark except for mine !

It came out like a year ago! WTF ?

So, I started to thing about the new "Glowz" paint from krylon ..

I've seen a few posts on the web about what other did with it ..

Its a little hard to work with, I'll admit, but figured, if I got a clear case for my phone and sprayed the crap out of it with glowz it would be fine ..

I was not wrong ..


But then I got to thinking .. what else can I spray and make glow ..

I wanted to paint everything in the house but, started with my mini mouse for my laptop .. but, the phone case barely captures the light it puts out .

But either way, check these out .. in case another person had the same idea ..

I had 2 of these mouses... mice ?
deer? flock of deers ?
..

any way ..
The old one died, and I throw almost nothing out, for stupid ideas/projects like this one :)
I just kept the original top, and put the glowing one on there.



Here is my spray area .. That thing on the left is the case for my evo3d.
 

                         It glows LIKE CRAZY ... I will post an update below, once its
                         on the phone, and its at night .. Might be easier to                    find phone at night, when I lose it like a dipshit ..


This is as close  a pic as I can get of the night glow .. you can just barely make it out .



So there we have it .. I will post more as I continue to do more with this magical paint.
It needs some scraping and manipulation to make it fit the mold again .. but works sweet .

out -
-B

Monday, July 15, 2013

Prelude intake AGAIN .... Yes, this would be the 5th time ..

Hi,

I think I may be a glutten for punishment.
This coming weekend, I am going to do the intake on my 96 h22 prelude.

Ive done this job ... 4 times before ..

I have a brand new skunk2 IM in the box, and all the gaskets necessary.
Hopefully, this will be smoother than previous times.

The 99 SH prelude was a bitch to work on because of the ATTS unit, and it was NOT compatible w/ the ECU in that car. Didnt stop me from doing the job 2 times (once in, once out) .. and then selling the intake .. (i thought i was done w/ preludes after that one) .. little did I know ..

I will post more stuff as I get it done, but I am getting a new car soon.
My prelude will be kept as a toy/winter beater.
Im not able to get rid of it .. I cant bring my self to do so.
I loved this car(s) more than my corvette, camaro, and trans am.

Heres a link below to my previous post. Ill grab some pics as I do this one again.
Fun times

-Brian


 http://briand354.blogspot.com/2011/09/intake-removal-reinstall-on-my-99.html

and the update-

http://briand354.blogspot.com/2011/09/prelude-intake-update.html






IBM T60 :Laptop: Fix ... The hdd threading went bad .. so .. i drilled ..

The internal screw that would secure the plastic cap over the drive caddy
became unthreaded .. and broke .. It was a tiny grooved piece of aluminum

So the next best thing ... I drilled out a hole about a 1/2" from the corner
using the 90 degree bracket  and making sure it would not affect the drive inside, or it closing.

Parts Needs :
Metal drill bit (going through aluminum frame)
Drill (mine sucked .. have to buy a wired one)
90 degree metal bracket
Screw/bolt
silicone for car gaskets

Cost - 
Bolt/screw kit - $2
90 degree bracket - $1 (maybe)
silicone car gasket maker - $3

Whole thing should cost about $5-6 or just use stuff acound the house and spend no $  !!!!!!!!!!!!!!!!!!!!!

I removed the sata drive while doing this mod .. just in case .. but because I measured correctly, It was not a problem.
Use the plastic drive caddy top as the measuring device .. if your bracket is too long, you would be drilling into the drive's area of the laptop, and thus - not be able to put that screw through the frame of the laptop.

**PSA - I am not to be held responsible for any damage you do to ANY of your crap because you listened to me on this blog for ANY of my posts **

Once you have the hole drilled - slip the screw through the frame, and bolt it tight. Then apply some of the gasket sealer, and let it sit in a way that it wont be glued to a table or something.

Good luck, hope this helps.
-Brian








Monday, June 24, 2013

How to hack a compound bow sight (for more UV)

Yooo.

Wassup!?
Been a while since I last posted something cool ..
Havent had time .. shits been busy.
All no one comments, so IDK if anyone even bothers to read what I post.

Not that many people like to hack and mod I realize.

But, I'm not one of them.

So recently, my buddy got me hooked on archery .. and its so much fucking fun.. I have to admit.

He bought a new compound bow, and hooked me up w/ his old one.

Doing the only thing I could think of, I started hooking it up w/ the normal accessories .. first was arrows, second was a sight.

I then ran into a cool issue/idea ......
The sight came w/ a uv led.  Having played w/ UV leds for a few years straight now .. I figured .. what the hell ..  I could make a WAY more powerful one for a few bucks ..  After a bad test  (that burned out horribly !) I had to go back to the drawing board .
But, I think I have the formula figured out .. its taken several tries (other the years) and I came upon what I think it a solution.

Check this out ..
Here is what the light looks like in complete darkness (or as dark as I can get it :) ]




Rear view of the modded sight

close up of the bezel, with the UV's on.

Here is the powering mechanism. This is just a 9v battery attached to a power plug.

             To light it: All you have to do is swing the battery terminal onto the
           9V prong. Nice and easy. I didnt want to add a toggle switch.

bad pic of the 9v zip tied to the mount for the sight itself. weights almost nothing.


 I can wait til the season for hunting. This is the year.
I dont think the light that it gives off will make the deer alarmed,
but well see I guess. At complete worst, I can turn it off easily.

we shall see ..
out-
-B

Sunday, February 3, 2013

My raspberry Pi & dl360 g5




https://www.youtube.com/watch?v=SEAwkUgJNqc

Check out my raspberry Pi running fedora remix ..





hanging in place, rasp pi

fan on, [pi on :)
inside view, and my fan/led setup

pi on, fan off
inside view .. my handywork
I added the upper drives, and lit them by adding the cable
 my dl360 g5 .. what a pain this has been to setup. Im getting there :)

-B


Friday, January 11, 2013

Raspberry pi in a box

I put a raspberry pi in a box .
It's slow but still badass.
I didn't want to pay crazy $ for a case so I just dremelled myself one out of a $1 plastic food container.